About (SnowWolf VFeng BF 120W Squonk Vape Starter Kit)
Snow Wolf continues its success with yet another innovative product, the expertly designed VFeng BF Squonk Vape Starter Kit that boasts tremendous power, great quality, and user-friendly design. SnowWolf is leading the way when it comes to innovation in the vape market, and that’s becoming its motto with the introduction of products like the VFeng Squonk Kit. Constructed of zinc alloy and featuring a futuristic appearance blazing with high appeal, you’ll come to realize SnowWolf’s thinking when it comes to the overall design of this tastefully crafted mod. The VFeng BF Squonk Mod offers a 1.30 inch TFT color display and a three-button control face. It has the capability of housing a single 18650, 20700, or 21700 battery, which is held in its compartment by a slide and lock button battery access door. Using SnowWolf pristine chipset you can climb up to 130 watts and experience temperature control with the support of Ni200, Titanium, Stainless Steel (304/316/317), and TCR adjustments. The micro-USB port that comes equipped allows for USB charging with a 2A maximum charge rate and accepts future firmware upgrades. Its most prominent feature is the dual squonk bottles, each placed on the side of the device and both featuring a 3ML e-liquid capacity. The SnowWolf RDA is also included in the kit, boasting a stainless steel construction, a 27mm diameter, a wide bore Delrin drip tip, adjustable side airflow control, and uses a postless build deck with quad terminals. The deck has tons of build space, a 7mm deep juice well, and uses a PEEK insulator. Additionally included in this Snow Wolf VFeng Starter is one high drain Snow Wolf 21700 40A 3750mAh Battery for long last battery life and an incredible draw. You’ll find that everything about the SnowWolf VFeng Squonk Kit speaks volumes, from its futuristic styling to the advanced design squonk portion of the mod. Be ready to be amazed!
SnowWolf VFeng BF 120W Squonk Vape Starter Kit Component
- 1 x Snow Wolf VFeng Squonk 120W TC Mod
- 1 x SnowWolf BF RDA
- 2 x Pre-Build Wires
- 1 x Cotton
- 1 x Spare Parts
- 1 x Snow Wolf 21700 40A 3750mAh Battery
- 1 x Micro USB Cable
- User Manual and Warranty Card
Specs & Features
- Snow Wolf Chipset
- Wattage Range: 10W-130W
- Voltage Range: 1.0 – 7.5V
- Atomizer Resistance Range: 0.05 – 3.0ohm
- Main Material: Zinc Alloy
- Temperature Range: 100C – 300C / 212F – 572F
- TCR Functionality
- Temperature Coefficient of Resistivity
- 3-Button Control Face
- 1.3″ TFT Colored Display
- Dual Squonk Bottles
- Micro USB Charge and Update Port
- Requires 1 x 18650, 20700 OR 21700 High Amp Battery
- 1 x Snow Wolf 21700 Battery Included
- 20mm Stainless Steel 510
- Reverse Polarity / Short / Low Resistance / Low Battery / Overheat Protection
Snow Wolf BF RDA Specs & Features
- Diameter: 27mm
- Build Deck: Postless
- Quad Terminals
- 3mm x 1mm Each Terminal
- Side Mounted Hex Screws
- Large Build Area for Specialty Coils
- PEEK Insulator
- Juice Well: 7mm
- Adjustable Side Airflow
- 18mm Wide Bore Delrin Drip Tip
- Bottom Feed 510 Pin Pre-Installed
SnowWolf Vfeng 21700 40A 3750mAh Battery Specs
- Battery Capacity: 3750mAh
- Amp Capacity: 40 Amps
- 3.7 Volts
WARNING: This is an advanced Item. Please use at your own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. DirectVapor is not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish, and packaging may vary.
Reviews
There are no reviews yet.